How do I access Sophos XG CLI?

Go to Administration > Device access to enable HTTPS on the required zone. For further analysis, you can do a Packet capture when you’re trying to access the GUI to find out more about the root cause. Read more in Sophos Firewall: How to filter packets using packet capture.

How do I open the CLI in Sophos XG firewall?

The CLI console can be accessed from the upper-right hand corner of the screen.

How do I access Sophos admin console?

To get the sign-in window, open the browser and type the internal IP address of XG Firewall in the address bar. A dialog box appears prompting you to enter username and password. Enter user sign-in name. If you are logging on for the first time after installation, use the default username.

How do I access Sophos XG via SSH?

The Source Network / Host is the IP address or network you will use to access the Sophos Firewall via SSH.

Turning on the SSH connection
  1. Sign in to the Web admin.
  2. Go to Administration > Device Access.
  3. Tick the SSH box for the zones you want to allow access to.
  4. Click Apply.
The Source Network / Host is the IP address or network you will use to access the Sophos Firewall via SSH.

Turning on the SSH connection
  1. Sign in to the Web admin.
  2. Go to Administration > Device Access.
  3. Tick the SSH box for the zones you want to allow access to.
  4. Click Apply.

How do I access my Sophos UTM console?

Access Sophos UTM via the following: Connect a monitor and keyboard and sign in using the account root . Connect a computer to Sophos UTM via a serial cable and use a terminal emulator application such as PuTTY and configure it to connect to COM1 with a baud rate of 38400 .

What is the Sophos XG default password?

Use this to change the password of the default administrator (username: admin). Enter the current password. Enter the new password, reenter it to confirm, and press Enter. Enter current password: Enter new password: Re-enter new password: Password changed.

See also  Why is it important to develop information literacy skills?

How do I log into my Sophos router?

Once your browser is correctly configured, launch the browser and enter the IP address of the Sophos UTM WebAdmin as follows: https://IP Address:4444 (e.g., https://192.168.1.1:4444). In the basic system setup window, enter the administrator contact and the passwords for the Sophos UTM appliance.

What is default IP for Sophos firewall?

Sophos Firewall always has one default interface configured on initial start-up using the IP address 172.16. 16.16 .

How connect Sophos firewall via Putty?

The Source Network / Host is the IP address or network you will use to access the Sophos Firewall via SSH. The Destination Host is your WAN port.

Turning on the SSH connection
  1. Sign in to the Web admin.
  2. Go to Administration > Device Access.
  3. Tick the SSH box for the zones you want to allow access to.
  4. Click Apply.
The Source Network / Host is the IP address or network you will use to access the Sophos Firewall via SSH. The Destination Host is your WAN port.

Turning on the SSH connection
  1. Sign in to the Web admin.
  2. Go to Administration > Device Access.
  3. Tick the SSH box for the zones you want to allow access to.
  4. Click Apply.

How do I open Sophos console?

You can connect to Sophos Firewall using the serial cable. You can also use the Micro USB port for some models. When you connect both Micro USB and RJ45 serial cables, Sophos Firewall gives priority to the Micro USB and redirects output to it.

How do I restart my Sophos XG firewall?

Select the AP you would like to reboot. Click on Ok. The below screen appears, type there y to connect to the AP.

Log into the command line interface (CLI) as follow:
  1. Login with username: admin.
  2. Enter the admin password.
  3. Use Option 5 for Device Management.
  4. Use Option 3 for Advance shell.
Select the AP you would like to reboot. Click on Ok. The below screen appears, type there y to connect to the AP.

Log into the command line interface (CLI) as follow:
  1. Login with username: admin.
  2. Enter the admin password.
  3. Use Option 5 for Device Management.
  4. Use Option 3 for Advance shell.

How do I bypass Sophos login portal?

The following steps exclude an internal device from the web proxy.
  1. Go to Hosts and services > FQDN host.
  2. Add an IP address or FQDN host for the internal device and save it.
  3. Create a firewall rule by following the steps on the documentation page Add a firewall rule. …
  4. Set the following details: …
  5. Click Save.
The following steps exclude an internal device from the web proxy.
  1. Go to Hosts and services > FQDN host.
  2. Add an IP address or FQDN host for the internal device and save it.
  3. Create a firewall rule by following the steps on the documentation page Add a firewall rule. …
  4. Set the following details: …
  5. Click Save.

How reset Sophos XG firewall Putty?

Connect to Sophos Firewall using an SSH client. At the prompt, enter RESET.

At the prompt, enter RESET.
  1. To delete all custom configurations and reset to the default configuration, choose option 1.
  2. To delete all custom configuration and signatures and reset to the default configuration, choose option 2.
Connect to Sophos Firewall using an SSH client. At the prompt, enter RESET.

At the prompt, enter RESET.
  1. To delete all custom configurations and reset to the default configuration, choose option 1.
  2. To delete all custom configuration and signatures and reset to the default configuration, choose option 2.

How do I restart my Sophos firewall?

The following screen appears: Select option 1 to list the available APs. Select the AP you would like to reboot. Click on Ok.

Log into the command line interface (CLI) as follow:
  1. Login with username: admin.
  2. Enter the admin password.
  3. Use Option 5 for Device Management.
  4. Use Option 3 for Advance shell.
The following screen appears: Select option 1 to list the available APs. Select the AP you would like to reboot. Click on Ok.

Log into the command line interface (CLI) as follow:
  1. Login with username: admin.
  2. Enter the admin password.
  3. Use Option 5 for Device Management.
  4. Use Option 3 for Advance shell.

How do I access Sophos user portal?

You can access the User Portal by browsing to https://<Sophos Device IP Address> or clicking “Click here for User Portal” from the Captive Portal page. Log on to the Portal using your user’s sign-in credentials.

See also  How much low grade fuel do you get from crude oil?

How do I enable SSH in Sophos XG?

Turning on the SSH connection

Sign in to the Web admin. Go to Administration > Device Access. Tick the SSH box for the zones you want to allow access to. Click Apply.

How do I turn off Sophos XG?

The available shutdown command is accessed via: Webadmin –> System –> Shutdown/Restart –> Select action: –> Shutdown, then click on Start.

How do I hide in Sophos?

You may go to Administration >>Device Access and disable HTTP, HTTPS, SSH, and PING. No one will be able to access your public IP terminated on the XG firewall but there is no specific feature to hide the IP.

How do I whitelist IP in Sophos firewall?

To whitelist in Sophos XG firewalls:
  1. Contact support and request a copy of our phish domains and landing domains.
  2. Log in to the portal for the firewall.
  3. Click on Web, located on the left.
  4. Click on Exceptions, located at the top.
  5. If you don’t have an exception list, click Add Exception.
To whitelist in Sophos XG firewalls:
  1. Contact support and request a copy of our phish domains and landing domains.
  2. Log in to the portal for the firewall.
  3. Click on Web, located on the left.
  4. Click on Exceptions, located at the top.
  5. If you don’t have an exception list, click Add Exception.

Does factory reset remove Sophos?

Reset allows you to reset your Sophos Firewall to factory default settings. Resetting to factory default settings does not affect registration. Connect to Sophos Firewall using an SSH client. At the prompt, enter RESET.

See also  How do I completely remove Linux from Windows?

What is Sophos admin password?

Type y and click Enter to reset the admin password to factory default. Sign in to the Webadmin GUI using admin as the username and password.

Scroll to Top