What does 5d mean on a Amana washer?

The 5d error code on your Amana washer is the Sd code, and it means that your appliance is struggling with too many suds inside. Some models will display the SUD code instead for the same reason.

What does F21 mean on a washer?

October 4, 2021. If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.

What does E1 F9 mean on a Whirlpool washer?

If F9 E1 (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation.

Why is my Whirlpool washer flashing 5d?

Too Much Detergent

Using an excessive amount of detergent is the most likely cause of the 5d error code. Check the owner’s manual to know the right amount of regular detergent needed for your laundry to avoid residual detergent. It is also important to note the the type of detergent used can cause the 5D error.

Why does my washer keep saying 5d?

Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in the display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the washer to continue.

What does Lo mean on a washing machine?

Possible Solutions. The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.

See also  What point of sale does Lowes use?

What does error code 5d mean on Whirlpool washer?

A Whirlpool Cabrio 5d error code means the same thing as an Sd or Sud error code; the washer is detecting too many soap suds. Whirlpool does not actually list 5d as an error code; instead, people misinterpret the Sd error code as reading 5d.

How do you unlock the door on a Whirlpool Duet washer?

Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.

How do I unlock my Maytag top load washer without power?

If you remove the top washer panel, you can reach down into the washer and pull the tear shaped tab at the bottom of the door lock and it will unlock the door. On some of the Maytag washing machine models, there is a green plastic rope/string located near the detergent area that if pulled, will unlock the door.

How do I unlock the door on my Whirlpool Duet washer?

Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.

What is 5d on Whirlpool washer?

Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in the display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the washer to continue.

See also  What version of PowerShell does SQL Server use?

Why does my Samsung washer say 5UD?

In most cases, SUD or 5UD means your Samsung washer has detected too many soap suds or too much foam during a wash cycle. When the washer detects too many suds, it displays the SUD or 5UD error code while it tries to fix the problem by adding more water and pausing the wash cycle to allow the suds to dissipate.

What does F21 mean on a Whirlpool washer?

October 4, 2021. If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.

What is E1 f3 Whirlpool washer?

The error code F03/E01 indicates a problem with the water level. If your washer doesn’t get enough water, it will not be able to work correctly.

What does F8 mean on a washer?

Possible Solutions. The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.

Why does my Maytag washer say no water detected?

This washer has sensors which detect the water supply, and requires both hoses to have water going to the water valve. If it does not detect both water supply hoses are turned on, the control detects a problem with the water pressure sensor. The lid will lock, and the machine will enter a pump out mode for 8 minutes.

See also  What does it mean when a job asks you to come shadow?

What is E1 error in washing machine?

When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. To resolve, checking the following: • Check whether the water supply is turned on and that there is adequate water pressure.

Why does my washer say F 21?

The most common causes of the F21 error code are: The drain pump has a blockage or is faulty and needs to be replaced. The drain filter on the drain pump is blocked or clogged.

What does LoC with a red key mean on Whirlpool washer?

If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

Why is my Maytag washer says E01 F09?

If your drain pump is in poor condition, the washer won’t drain water effectively, causing the error E01 F09 to show up on the electronic control board. You can test the pump by following this procedure: Check for any obstructions throughout the drainage system.

Scroll to Top