Warning: There is water trapped in the base of the machine follow the instructions below to tip the machine and drain the trapped water. Disconnect the appliance from the water and power supplies and then place a towel behind the washing machine on the floor.
How do I fix EFO on my AEG washing machine?
Drain filter blocked: clean the filter at the bottom right and catch the dirt in a container. Place the filter back in. Too much detergent: run a cycle with an empty drum at 60°C and rinse until there's no more foam.
What does EFO mean on a John Lewis washing machine?
What does EFO mean on a Zanussi washing machine?
Then there is internal leakage and water under the drum. This is often caused by a piece of clothing or shoelace between the door on the cuff.
How do I reset my AEG washing machine?
What does E40 mean on a washing machine?
Washing machine displays error code E40 or emits 4 beeps / 4 flashes when the door is not closed correctly or there is a problem with the door lock. Likely causes.
What does E20 mean on a washing machine?
E20 error code indicates a draining issue.
How do I clean the filter on my John Lewis washing machine?
Run the filter under warm water and clean it gently with a soft brush but NO detergent.
Why is my Indesit washing machine leaking?
Take care to check the fill hose connection to your washing machine and to the mains plumbing (taps) are secure. It’s also possible for a leak to appear from your detergent dispenser, which can be caused by excessive water pressure or the washing machine has not been levelled properly during installation.
What does 0 mean on a washing machine?
9. Washing machine codes table. 0. The drum clean reminder is left on.
What does EHO mean on a dryer?
Error messages EHO (EH0) indicate a problem with the power supply.
How do I get rid of Mould in my washing machine draw?
- Bicarbonate of soda.
- White vinegar – you could use a spray like this one on Amazon, or make your own by mixing white vinegar with equal parts water in a spray bottle.
- Bleach or Bathroom cleaner.
- Scrubbing sponge.
- Bicarbonate of soda.
- White vinegar – you could use a spray like this one on Amazon, or make your own by mixing white vinegar with equal parts water in a spray bottle.
- Bleach or Bathroom cleaner.
- Scrubbing sponge.
How do I unlock my AEG dryer?
To deactivate press and hold Options (6) and Spin (7) for 5 seconds until the padlock no longer displays on the LED display. To activate press and hold Options (6) and Spin (7) for 5 seconds until the padlock appears on the LED display.
Why is my LG front load washer leaking underneath?
Make sure the drain hose is properly installed. Make sure the drain hose is not stretched, pinched, crushed or kinked. Make sure the drain hose is not air-tight inside of the drain. Check for a clogged drain.
Why is my Samsung front load washer leaking?
Top reasons why Samsung washer is leaking include a faulty water inlet valve, a problematic drain pump, a clog in the drain filter, damaged door seal, or soap dispenser hose is blocked. Root causes are much easier to identify based on where the leak is coming from.
How do I clean my LG tub?
- Press the [Power] button.
- Press [Cycle] button and select [Tub Clean] cycle.
- Add correct amount of washing machine cleaner by following the manufacturer’s dosage instructions.
- Press [Start/Pause] button.
- Press the [Power] button.
- Press [Cycle] button and select [Tub Clean] cycle.
- Add correct amount of washing machine cleaner by following the manufacturer’s dosage instructions.
- Press [Start/Pause] button.
How do I get rid of the red key on my Samsung washing machine?
When active, the “Child Lock ” indicator will light up (padlock symbol) on the front panel. To activate or deactivate the Child Lock function, hold down both the “Temp” and “Spin” buttons for 3 seconds, see the diagram below.
What are the most common problems on a Whirlpool washing machine?
- Washer Making Unusual Noises. …
- Washer Won’t Start. …
- Washer Lid Won’t Lock. …
- LD Error Code Appears. …
- Washer Leaves Deposits on Dark Clothes. …
- Washer Has a Burned Plastic Odor. …
- Rust Spots Appear on Washer Lid.
- Washer Making Unusual Noises. …
- Washer Won’t Start. …
- Washer Lid Won’t Lock. …
- LD Error Code Appears. …
- Washer Leaves Deposits on Dark Clothes. …
- Washer Has a Burned Plastic Odor. …
- Rust Spots Appear on Washer Lid.
How do I clear the 4E code on my Samsung washer?
- Check the water hose. A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine. …
- Check the water supply. …
- Clean the water hose mesh filter. …
- Clean the dispenser drawer.
- Check the water hose. A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine. …
- Check the water supply. …
- Clean the water hose mesh filter. …
- Clean the dispenser drawer.
How do I unlock my Whirlpool washer without power?
Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer’s programming should be reset and the door should open.
How do I unlock my Maytag washer without power?
Washer door unlock fix: Cancel the wash cycle, wait for it to drain the water and the door should unlock, OR pull the green string near the detergent area, OR pull the lever on the bottom of the door switch, OR unplug the washer for 5 minutes to reset. These 4 things should unlock your washers door.