What does F21 mean on a Bosch washer?

F21” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed.

How do you reset error F21?

How do I fix F21 on my washing machine?

Why does my washing machine say F 21?

Why does my Whirlpool washer say F 21?

If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.

How do you unlock the door on a Whirlpool Duet washer?

Pull down on the bottom panel and pull it away from the washer. Reach through the open panel and up to the door lock. Find the release ring below the locking mechanism. Pull down on the ring to unlock the door.

Why is my Whirlpool washer door locked?

The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it’s supposed to.

What does E08 mean on a washing machine?

If you put too many clothes in the drum and overload the machine it may result in error code E08 being displayed. Should this occur then reduce the load size by removing some of the garments in the drum and try again.

Does a Whirlpool Duet washer have a filter?

The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months. If the lint is not removed, it can cycle back through the washing machine and stick to laundry.

What does F mean on Whirlpool washer?

An F error code usually means the washer will not work at all, and the control board will need to be replaced.

What does F12 mean on a washing machine?

F12 — Electronic control fault. Issue: Washing Machines is not operating (turning on).

Why does my washer say F 21?

If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.

What does LoC with a red key mean on Whirlpool washer?

If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

How do I unlock my Whirlpool top load washer without power?

Accessing a Top-Loading Washer. Push the Start/Stop button to unlock the washer door during the spin cycle. Pause the machine by quickly pressing the Start/Stop button once. After a few seconds, the washer will halt and you’ll hear the door unlocking.

How can I open my Samsung washing machine without power?

Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off. If you get stuck, though, you can drain the water from front load washers using the emergency drain hose; once the water is gone, the door will unlock.

How do I unlock my Whirlpool washer without power?

Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer’s programming should be reset and the door should open.

What does E03 mean on a candy washing machine?

An E03 error code indicates there was a problem with the drain circuit. This usually means there is something stuck in the pump.

Do all front loading washers have mold problems?

Fifteen percent of all front-load washer owners reported mold or mildew build-up in their machines—compared with only 3 percent of HE top-load washers and 1 percent of top-load agitators.

How do I clean my Whirlpool washer without affresh?

As an alternative to a formulated washer tub cleaning product like Affresh, you can clean and sanitize the inside of the tub with a combination of white vinegar and baking soda, or liquid chlorine bleach (be aware that vinegar and bleach should never be used together).

What does 5d mean on a Whirlpool washer?

Did you receive an Sd (may appear as 5d) or Sud Error Code? If Sd or Sud (excess suds) appears in the display, you have excessive suds in washer. The washer is running a suds reduction routine. Allow the washer to continue. Use only HE (High Efficiency) detergent.

How do I clear E1 F9 code?