If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.
What does code F8 mean on a Whirlpool washer?
How do I fix error F8 E1?
…
If code is still displayed:
- Unplug the washer or disconnect the power for one minute.
- Plugin the washer or reconnect the power.
- Re-select the cycle and press Start.
…
If code is still displayed:
- Unplug the washer or disconnect the power for one minute.
- Plugin the washer or reconnect the power.
- Re-select the cycle and press Start.
What does F8 mean on a Maytag washer?
What does F8 E1 mean?
What does E03 mean on Whirlpool washer?
E03 The overflow condition occurs if there is too much water or foam in the washer. If overflow occurs, the valves are closed and the drain pump switches on for at least 30 seconds. … Once the error code is displayed, the cycle is terminated and all water is pumped out.
What does Lo mean on a washer?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Why does my washer says Lo FL?
The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Why is my Whirlpool washer saying no water detected?
No Water Flow Detected
This can be caused by several reasons, including the following: Washer/dryer may not be connected to the home water supply. Home water supply valve may not be turned on. Inlet hose to washer/dryer may be kinked.
What does F01 mean on a Whirlpool washer?
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. …
Why does my washer keep saying F5?
What could that mean? The Maytag washer code F5 is an alert that tells you the lid can’t lock. There could be some clothing or other obstruction in the lid preventing it from locking. This is one of the simplest problems to fix.
What does F8 mean on washer?
If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.
What does F8 mean on a washer?
Possible Solutions. The F8 E1 or Lo FL error code means your washer is not detecting the correct amount of incoming water. If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive.
Why does my washer say FL?
LF in the display
When “LF” is displayed, there could be an issue with the water flowing into the machine. Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve.
What does F8 mean on a washing machine?
If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.
What is E1 f3 Whirlpool washer?
The error code F03/E01 indicates a problem with the water level. If your washer doesn’t get enough water, it will not be able to work correctly.
What does F8 mean on Whirlpool washer?
If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.
What does F mean in a dryer?
The F-01 error code indicates a primary control failure. The primary controls are located inside the main control panel where the dryer cycles and settings are displayed. Any burns or arcing on the motherboard where the wires are connected could mean the primary control was shorted out.
What does E03 mean on a washing machine?
An E03 error code means that your washing machine has encountered a draining problem.
What does 5d mean on my washer?
Report Ad. The 5d (or Sd) error number indicates that the control detected a suds lock or detergent overdose during the cycle’s drain or spin phases. This is frequently caused by excessive detergent use. It can also be caused by using standard detergent instead of HE detergent (High Efficiency).