What is a 7 3 split?

Essentially for a 7/3 split, a driver has to stay in the sleeper berth for seven hours, and then spend another three hours relaxing somehow, or even going back into the berth.

How does a split reset work?

How do you do a split sleeper berth?

How do you use split sleeper berth Keeptruckin?

What is the 8 hour rule?

According to the FMCSA’s 30-Minute Break Rule, a driver has a window of 8 hours to drive after their last off-duty period of at least 30 minutes. In the old rule, once a driver went on-duty in a day, the driver had to take a 30-minute break by the 8^th hour before being allowed to drive again.

What is the 14-hour rule?

The DOT 14-hour rule is a law that dictates how long a driver can work in a 24-hour time period. According to the rule, a driver must fit all of their drive time for the day into a 14-hour shift. This law states that a worker must take a mandatory ten hours off duty after their 14-hour driving shift.

Does going off duty stop your clock?

Drivers can pause the 14-hour clock today

This is known as the “split sleeper-berth” option, and it works like this: The driver must take a break of at least 2 consecutive hours sometime during the day. The break must be spent off duty or in a sleeper berth (or using a combination of the two).

What is a 7 3 split?

Essentially for a 7/3 split, a driver has to stay in the sleeper berth for seven hours, and then spend another three hours relaxing somehow, or even going back into the berth.

What is an 8 2 split in trucking?

A second solution, albeit only a temporary and occasional option, is to utilize the 8/2 split sleeper rule. According to FMCSA, “Drivers using a sleeper berth must take at least 8 hours in the sleeper berth and may split the sleeper berth time into two periods provided neither is less than 2 hours.”

What happens if you go over your 14-hour clock?

Once the driver has reached the end of this 14-consecutive-hour threshold period, they cannot drive again until they have been off duty for another 10 consecutive hours, or the equivalent of at least 10 consecutive hours off duty.

What is a 8 2 split?

A second solution, albeit only a temporary and occasional option, is to utilize the 8/2 split sleeper rule. According to FMCSA, “Drivers using a sleeper berth must take at least 8 hours in the sleeper berth and may split the sleeper berth time into two periods provided neither is less than 2 hours.”

What stops your 14-hour clock?

Drivers can pause the 14-hour clock today

This is known as the “split sleeper-berth” option, and it works like this: The driver must take a break of at least 2 consecutive hours sometime during the day. The break must be spent off duty or in a sleeper berth (or using a combination of the two).

How many hours can I drive in a day?

The maximum driving time in a day is 10 hours. This should not exceed 16 hours between the start and end of work. At least 10 hours continuous rest should be taken between two working days, but this can be reduced to 8 hours 30 minutes up to three times in a week (a week is Monday to Sunday).

What is split sleeper?

Split Sleeper Overview

Split Sleeper toggle on the Driver App allows the driver to split their required 10-hour off-duty shift, provided that one off-duty/sleeper berth break is at least 2 hours long and a second off-duty break minimum 7 consecutive hours long spent in sleeper berth.

Can truckers drink alcohol?

Drivers are forbidden to use alcohol, be under the influence of alcohol, or have any measured alcohol concentration, while on duty, or operating, or in physical control of a commercial motor vehicle. Alcohol can only be transported as part of a shipment.

What pays the most in trucking?